Difference between r1.1 and the current
@@ -1,4 +1,25 @@
C/C++의 경우 `size_t` 그리고 `ssize_t` 가 있는데
전자는 unsigned 후자는 signed
stddef.h 헤더에 정의.
C++ `size_t` : https://en.cppreference.com/w/cpp/types/size_t stddef.h 대신 cstddef 헤더를 include하면 std::size_t 로 쓸 수 있음.
https://namu.wiki/w/size_t
C++에선 auto가 better
----
[[길이,length]] [[지름,diameter]]
[[반지름,radius]]
...
mkl
[[양,quantity]]
[[측도,measure]]
(too misc+easy? del ok)
크기를 곱셈으로 구하는 경우
일반적인 곱셈을 하는 경우: [[직사각형,rectangle]] — 두 수를 [[곱셈,multiplication]]한 결과인 [[곱,product]]이 직사각형의 크기인 [[넓이,area]].
같은 것을 두 번 곱하는 경우([[제곱,square]]) — [[정사각형,square]]
C/C++의 경우
전자는 unsigned 후자는 signed
size_t
그리고 ssize_t
가 있는데전자는 unsigned 후자는 signed
C
size_t
: https://en.cppreference.com/w/c/types/size_tstddef.h 헤더에 정의.
C++ size_t
: https://en.cppreference.com/w/cpp/types/size_tstddef.h 대신 cstddef 헤더를 include하면 std::size_t 로 쓸 수 있음.
https://namu.wiki/w/size_tC++에선 auto가 better
(too misc+easy? del ok)
크기를 곱셈으로 구하는 경우
크기를 곱셈으로 구하는 경우
일반적인 곱셈을 하는 경우: 직사각형,rectangle — 두 수를 곱셈,multiplication한 결과인 곱,product이 직사각형의 크기인 넓이,area.
같은 것을 두 번 곱하는 경우(제곱,square) — 정사각형,square
같은 것을 두 번 곱하는 경우(제곱,square) — 정사각형,square